To change MUGIC® parameters, such as:

• AP Mode: network name (AP SSID) and password, and port number,
• Client Mode: network name (WiFi SSID) and password, and port number, as well as Client IPs to send the MUGIC® data to,
• Bluetooth: device name (BLE Name),
• Other parameters: output data format, frequency, etc.

Editing configuration can be done in a browser such as Chrome

• via Wi-Fi:
  - When connected to MUGIC® in AP mode, simply visit http://192.168.4.1/configure
  - In Wi-Fi Client mode, use the IP address of MUGIC® instead of 192.168.4.1
  
• via Bluetooth:
  - Visit https://mugicmotion.com/mugic2/ble-config using Google Chrome (will not work on Safari).
  - Click on “Connect to Mugic Device”, a popup window will open.
  - Press Power and Mode buttons simultaneously, the BLE name of your mugic should appear in the window, select it and click “Pair”.

In either of these websites:

• Edit the existing value(s), then press ”Send”.
• A "Configuration accepted" popup will confirm the change.
• An "Error" popup with an explanation will indicate that the change was not applied to MUGIC®.